MikroElektronica's EEPROM 3 click carries Microchip’s AT24CM02 DIP-8 socket EEPROM chip with 256 KB of memory. The chip has byte and page write speeds equal to or less than 10 ms. The EEPROM3 has 100 years of data retention and is rated for a million write cycles. The memory is organized as 262,144 x 8 bits. The board communicates with the target board MCU through the mikroBUS I2C interface (SCL, SDA pins) with speeds up to 1 MHz. An onboard jumper allows the selection of the device address (two of them can be connected on the same I2C bus for a total of 512 KB). This click board is designed to be powered at 3.3 V or a 5 V.
The Microchip AT24CM02 device 2 Mb 2-wire serial EEPROM with full memory write protect supports up to two devices on a single 2-wire bus. The EEPROM has 262,144 words x 8 bits, and is optimized for industrial and commercial applications where low-power and low-voltage operations are essential.
Video: EEPROM 3 click - Example
| Specifications |
|
|
- Applications: EEPROM 3 click is an excellent choice for storing initialization and configuration data of a device, when an I2C interface is required
- On-board modules: Microchip's AT24CM02 DIP-8 socket EEPROM chip
- Key benefits: two devices can be connected on the same I2C bus; one million write cycles, and 100 years of data retention
|
|
- Key features: 256 KB of memory; I2C interface
- Power supply: 3.3 V or 5 V
- Compatibility: mikroBUS™
- click board size: S (28.6 mm x 25.4 mm)
|
การตั้งค่า
จัดส่งที่รวดเร็ว
จัดส่งฟรี
Incoterms
ประเภทการชำระเงิน
ผลิตภัณฑ์ตลาดออนไลน์
MikroElektronica's EEPROM 3 click carries Microchip’s AT24CM02 DIP-8 socket EEPROM chip with 256 KB of memory. The chip has byte and page write speeds equal to or less than 10 ms. The EEPROM3 has 100 years of data retention and is rated for a million write cycles. The memory is organized as 262,144 x 8 bits. The board communicates with the target board MCU through the mikroBUS I2C interface (SCL, SDA pins) with speeds up to 1 MHz. An onboard jumper allows the selection of the device address (two of them can be connected on the same I2C bus for a total of 512 KB). This click board is designed to be powered at 3.3 V or a 5 V. 
ไทย